Sew the robe together using a 1/2″ seam allowance. Trim any excess threads, then turn the robe right sides out.
Sew the four pieces of leftover rectangular fabric, right sides together, to form a long chain This will be the robe tie.
Fold the tie in half the long way (with the front of the print facing inside) and pin together. Sew along the length of the seam, leaving the two ends open, then trim any excess fabric and threads.
Scrunch up the tie to fit your fingers through the entire length of tie- grab the end and pull through itself to flip the tie inside-out. Fold the ends of the tie in on themselves, then sew them closed by hand. Iron the tie flat, and voila!
Terry Paul
Paul Terry is a publisher and an author in wowplus.net and other news channel
